Phase 2 · Tool 16 of 77
Parallel Pump Capacity Planner
Sums rated capacity only for pumps that are compatible with the desired discharge pressure, using a simplified approximate derate - not each pump's real curve. No blind capacity summation.
ℹVerify locally before acting. This tool is a planning and arithmetic aid, not a substitute for training, local SOPs, calibrated instruments, or scene assessment. Confirm critical values independently. Suite status: DRAFT - not yet department-approved for operational use.
When you'd use this: Multiple engines pumping into the same main or manifold - for example two or three engines feeding one master stream - figure out the combined usable capacity at the target discharge pressure.
Result
Enter at least one pump and press Calculate.
